Drumlabooh | Драмлабух

Free LV2/VSTi drum machine for Linux and Windows

🥁 Home | Главная 🥁 About | Инфа 🥁 Install | Скачать 🥁 Manual | Руководство 🥁 Donate | Донат 🥁

NEWS

April 20 2025 - 8.0.0 release

This release features the new resampler by David Bryant. Why the resampler is important? When drum kit's samples sample rates is not equal to DAW's session sample rate, Drumlabooh resamples the samples during the loading. If the drumkit is large, it can cost a lot of time. Now the resampling is 10x faster! Also, now Drumlabooh more correctly loads stereo samples (was: load just the left sample; now: load both channels, then mix them to mono with a half of the level).

April 06 2025 - 7.0.1 release

+ Ubuntu 24.x "fix" (actually README.md update) - add libfontconfig1-dev to dependencies
+ Build with JUCE 8.0.6
* Some CMakeLists fixes to turn off unneeded features

March 29 2025 - 7.0.0 release

In this version, I removed a lot of legacy code and rewrote SFZ reader, so now Drumlabooh can load alsmost any existing SFZ drumkit, but SFZ's "inlcude" directive and round robin options are not supported.
Drumlabooh's own kit format is extended to make complex kits creation easier, you can define the kit part at the single file, and use its file name at the whole kit definition. This brokes Drumlabooh kit compatibility with my legacy drum machine Drumrox, but all previously created and simple kits are stays compatible. Unfortunately, at this moment no new extended format kits are created.
And for now the state of formats support is following:
Drumlabooh: up to 36 instruments per kit, multi layer (127 layers per instrument), round robin options, note mapping. The ability to clone the kit with sessions sample rate to make it load faster.
Quick Kit: the simplified Drumlabooh kit format that allows user load external samples directly with GUI.
SFZ: up to 36 instruments per kit, multi layer (127 layers per instrument), note mapping, sample offset.
Hydrogen: up to 36 instruments per kit, multi layer (127 layers per instrument, but 16 is the limition of the format).
Smart "hihats mute" works automatically for all formats. All pan and volume settings hardcoded to drumkit are ignored to the favour of Drumlabooh built-in mixer.

НОВОСТИ

20 апреля 2025 - 8.0.0 release

В этой версии новинка - ресэмплер от David Bryant. Ресэмплер очень важен, ибо когда вы при работе в DAW загружаете драмкит в Лабуха, то если частоты оцифровки сэмплов не совпадают с частотой проекта DAW, сэмплы при загрузке переоцифровываются к частоте DAW. Так вот с новым ресэмплером это происходит в 10! раз! быстрее! Также, Лабух стал иначе загружать стерео-сэмплы. Раньше он читал из них только левый канал, а теперь оба, и сводит их в моно с половиной уровня.

06 апреля 2025 - Версия 7.0.1

+ Возможность сборки под Ubuntu 24.x (на деле правка документации README.md ) - установите дополнительно libfontconfig1-dev как для удовлетворения зависимости
+ Сборкс с JUCE 8.0.6
* Чистка CMakeLists - удалено лишнее

29 марта 2025 - релиз 7.0.0

Полностью переписана поддержка SFZ, расширен собственный формат Лабуха (однако новые киты с расширениями еще не готовы, поэтому и не буду подробности). Изменения обработки зависимости миди-скорость и слой инструмента для китов формата Лабуха. Словом, всё стало лучше.

Made by Peter Semiletov | Создано Петром Семилетовым


Drumlabooh TG